Board And Batten Tutorial

/

I’m so thrilled to f-i-n-a-l-l-y be sharing our board and batten treatment with you! It’s taken forevah to get it done so I could show you. Other projects have taken top priority.  A board and batten wall treatment is a quite simple, yet complex {read: time consuming} process. If you’re looking to add architectural interest and detail to your home, board and batten might just be the thing for you.

For our little cottagey casa, board and batten is perfect. Our walls are 60 year old plastered textured dry wall. The texture isn’t a nice texture…it’s old, cracking and hideous. So instead of being able to cut corners like many AMAZING home bloggers, we did it the hard way and installed both our boards and our battens.

The difference that board and batten has made in our home is absolutely stunning.

Before – when we lived here four years ago as newlyweds

During – when we moved in the board and batten was primed.

Just FYI, the paint looks incredibly gray in this picture that I took when snow as on the ground. It’s the exact same paint color that’s in the next picture.  Crazy!

Today – I’m in LOVE! 🙂

This board and batten tutorial post is long, but hopefully easy to understand. We didn’t do everything right or the easiest way, so I’ll share some tips for you along the way.

After removing the baseboards, we painted the walls Sherwin Williams Ramie. Looking back, we could’ve saved time by painting the upper half of the walls {duh!}…but we’re learning as we go.

We bought 1/4″ luan at Lowe’s to install as the “boards” to cover the ugly, old textured walls. We also purchased a ledge type trim to use above the luan.

Then we used liquid nails and paneling nails to attach the luan to the walls.

My hubs used the jigsaw to cut out around outlets and light switches.

After we reinstalled the baseboards and nailed up the ledge trim, I used floral tape {it was the only thing I had on hand} to mark out where the battens would go.  I wanted to get them equally spaced, but also I needed to know exactly how many lattice boards I needed from Lowe’s.

We angled the lower edge of the battens, so they would look nice against the baseboards.  I learned this trick from Kimba’s board and batten tutorial! 🙂

We used a spacer and level to make sure that the battens were equally spaced apart and exactly vertical. My hubs is an engineer…aka…math geek.  In a few places, we centered the battens and equally spaced them instead of making them exactly equal all the way around the entire room.  Just use good judgment to see what will look the best.

For example…

We used liquid nails and paneling nails for the battens as well.  We don’t have a nail gun, so we nailed in each one and then set them. It was time consuming work.  We hooked a few family members into helping us out with setting nails and caulking. 🙂

My brother and I sanded the caulked places, then I primed the board and batten with Zinsser primer.  I didn’t know this at the time, but Zinsser primer is available in Zero VOC. Holla!

{swoon}

It’s starting to look so much better!!

I painted the board and batten with Olympic Zero VOC Ultra White in Satin. I love Zero VOC paint! My roller made the paint bubble. I have no idea why this is.  Anyone know? I’ve used both  foam rollers and nappy rollers and both of them make bubbles in the paint. I can’t stand it so I just used my Purdy paintbrush on the board and batten.

Beautimous!

My husband and brother-in-law installed the crown molding with a nail gun.  Can I just say that I’m in love with that thing?  Amazing!

Here’s how it looks now. I still have a bit of touch up work to do and maybe, just maybe, I’ll add another coat of paint on the board and batten. We’re also going to add quarter round trim to finish off the baseboards.

Whew!  We made it. I admire you if you’re still reading this long post!  If we can successfully do a board and batten wall treatment, then you can too!!

Have a fabulous day y’all!

Linked to: Decor Chick’s Molding Party, House of Hepworths, Transformation Thursday, Show and Tell Saturday, Get Your Craft On, How-To Day and Remodelaholic!

76 Comments

  1. It looks so beautiful, Myra! You guys did an awesome job and I loved your tutorial. Your lovely, real spirit always shines through your words and that’s one of my fave parts. 🙂

  2. Beautiful! We still rent but I’m saving up ideas for when we buy our first home! I don’t know if we could do this, though. We’re not very “handy.” 🙂

    1. Girl…y’all could SO do this!!! Many people use their walls (dry wall) as the boards, so all they add are the battens. It’s much easier and quicker than the way we did it because we wanted to cover up the texture. 🙂

  3. Looks fabulous! I want to do this in our daughters room – I love the cottage/cozy feel it gives!

  4. Love it! You did a great job! We did this about five years ago to our dining room and I’m ready to try it in another room! Haven’t tired of the look.

  5. myra this looks wonderful! 🙂 your hard work payed off ten-fold! I can’t wait to get this done in my husband’s bathroom – it is on the list of things to do this year… my only question – you just used liquid nails to adhere the luan to the wall and then uses nails on the batten parts right? did the nails fo the batten go through the luan and your wall? just curious! anyway – looks awesome! yay!

  6. Myra, this looks awesome and the tips were so helpful. Even before I got married I knew I needed to revamp my then fiance’s home (probably about the same age as yours) and board & batten was definitely in my game plan but I had nooooooo idea how to even start. I’ve actually been waiting for this post because I knew you’d make it easy for someone like me to get. haha Thanks so much! I hope mine will look half as wonderful as yours. 🙂

  7. Ummm….LOVE THIS!! So glad you showed how to angle the battens so that you could use your existing baseboards! I thought I was going to have to get rid of mine! Getting ready to start this project in my laundry room, but would totally LOVE it throughout my living room, kitchen, & hallway as well! I’m going to stumble this for future reference! Thanks Myra!

  8. Looks amazing! We put the board and batten in our long hallway and it made such a huge difference in our home. I love it! Kind of feels like its own room. ALSO, I’m sure you’ve mentioned it somewhere before, but what is the paint color on your living room walls? I’m compiling a list of colors to choose from for my paint project and I really like yours! Thank you in advance!

  9. It is SO beautiful Myra!! It has dramatically changed your home and it’s lovely! Great tutorial too and I love that it’s the real boards! 🙂 Yes, y’all must invest in a nail gun too. 🙂

  10. This was easy to follow. It looks GREAT and I am in love. I think this summer we are going to do this in our dinning room or boys room. Our home was built in 1918 so we are right with you on wall issues. Your home is comming together beautifully!

  11. Fabulous! I am in the process of painting my entire main level in Ramie!! What a great neutral…just enough color to pop. I paired it with Nacre and painted horizontal stripes in our classroom/playroom/kid hangout space. LOVE IT! Maybe I’ll try the board and batten in my craft room 🙂

  12. When are you coming to visit in Keller again?? I need some inspiration like you have!! Once the {taking-WAY-longer-than-planned kitchen project} is finished, I can move on to the rest of the house. I am desperate to love my home again. Right now I just resent it for being cluttered and ugly.

  13. It looks wonderful! You guys should be super proud of yourselves… All that hard work will be something you can take pride in forever.

  14. What a beautiful job you did! I am impressed and encouraged. Thank you for sharing. I am keeping my eyes out for kitchen ideas whenever you get back to it. (I assume the bathroom takes precedent for now!).

  15. This looks amazing! I’m SO antsy to try some board and batten myself, but we’re thinking of moving this spring, so I’m TRYING to bide my time and just plan for it to be a part of the new house. But I’m not doing so very patiently 🙂

  16. Myra,

    That looks so awesome! What a difference you are making. You’re making quick progress on your sweet little home. Can’t wait to keep watching.

    Love ya!
    Denise

  17. I am in major ‘like’. :o) Great job, it looks beautiful and I’m still in search of a desk like the one you found so that I can create one for my house too!

  18. I Love this! I’ve never commented before, but have been looking at your blog for quite a while. I had a couple of questions…Where did you get your clock? I love it! and also did you make that wreath on your door…from what I can see I love it too! If you did do you have a tutorial? 🙂 Keep up the good work. I’m enjoying your progress!

  19. Beautiful wall treatment. It looks so good, and I love the decorations on the wall above it. Nice work with the layering! Gorgeous.

  20. This is so darling I love it! Thanks for sharing!
    You guys did a great job it added so much detail to a flat wall. love above too way to go oh and the crown moulding, I want to do that in my house. Saw this on Decor chick glad you linked up.
    -Lindsay
    countrygirlhome.blogspot.com

  21. You make it look so simple! I would love to do this in our house, but I am not ready to commit to painting our trim… It looks beautiful.

  22. Myra,

    I love it! We are doing this in the bathrooms and maybe the living room. I just love the feel that it brings to the whole room.

    Cherie @http://dragonfliezcreationz.blogspot.com

  23. So nice! I like your choice of colors, I may have to check out Ramie at SW. I’m trying to decide what color to use in my living area…I want a neutral that’s not too dark and not too yellowish and not too gray…so I’m in the struggle phase :\ Thanks for the inspiration!

  24. Your room looks lovely, and I can’t wait to try this in my family room! …Just waiting to slipcover the couch and loveseat first!
    About bubbles in your paint…I have had the same problem, and I *think* I know what causes it. If you don’t completely soak your roller in paint, there is air trapped in it underneath the paint. As you roll onto the walls, you push the trapped air out into the paint, and it leaves the bubbles. I think the solution is to completely squeeze paint INTO the roller, like water into a sponge. Then there is no room for air!

  25. I am TOTALLY inspired. We have a house built in 1884. The walls are hideous! I had planned on doing beadboard in several rooms… but after reading your tutorial, I think board & batten might be easier and cheaper!

  26. Fabulous. We have the exact same idea for our living room. May I ask how tall the finished product is. I would like to do higher than a chair rail and more like a dinner rail, but I’m struggling with the height and really like yours. How high is the finished product?

  27. I just found your blog and loving your style. The board and batten makes a huge difference. We are moving into our new home soon and can’t wait to do this to my home..just scared that I might want to do it all over! I may need someone to hold me back! Hehe. Great job!

  28. This looks AMAZING! WOW! Spectacular job. I sent your link to my handy man for an estimate…love it! I would love to do this myself, but we have a serious time issue at my house! I juts LOVE it and your design looks awesome!
    Stacey :o)

  29. We have SW Ramie throughout most of our first floor. It’s such a great color! Your board and batten looks awesome. I’d love to add your entry pics to my inspiration galleries and include you in a feature post. Let me know if you’re interested!

  30. Where did you find your batten boards (i.e., lattice strips) at Lowes? I have gone to the store but didn’t find any at our local store. Yours looks great!!!

  31. So well done! Thanks for breaking it down step by step, I’ve always loved the look and now feel like I can accomplish this in our dining room. If I may ask, did you cut each batten or were you able to buy them that width? I saw on the blog you tagged they used MDF, but that doesn’t appear to be what you used. What material did you use and would you choose it again? Thanks for your help. Can’t wait to have this look in my own home!

    1. Hey Kelly! Thanks for your comment! 🙂 We used lattice strips from Lowe’s. I don’t remember where in the store we found them, but I think it’s in the lumber section. I’m sure you can just ask someone when you go in. They worked like a charm! 🙂

  32. Nice work! Not as simple as you made it look. This would work well in a nursery with lighter tones or darkened in a den.

  33. Hi Myra-
    Thank. You soo much for the tutorial! We are getting ready to tackle this project ourselves and this post really put us (me) at ease! 🙂 will you be doing this in the new Casa??

  34. Looks so great!! I love the pics/mirror you put above it in the entry way as well. Our last name’s initial is Y too so I think it’s making me biased toward using the “y” mirror idea 🙂

  35. Hi Myra – Just stumbled upon your blog via Pinterest. I’m digging your new walls and can’t help but wonder if you covered a doorway? You didn’t mention it in your post so maybe I’m confused. Anyway, if you did, I want to say it’s the most clever, non-permanent way to hide a doorway! Great work overall… 🙂

  36. Can you post a pic of the wall with the window in it? I’d love to see how that wall turned out, I’m stuck figuring out how to artistically make my walls with windows work with this. You make it look so easy! Great job. I love that you made them tall.

  37. Wow this is just amazing, I love it. Thanks for the tutorial. I wonder if I can get the husband to pull the furniture out of the living room so I can do this before Christmas. Hmmm, DOUBTFUL.
    THANKS AGAIN
    Kat

Leave a Reply

Your email address will not be published. Required fields are marked *

I accept the Privacy Policy

CommentLuv badge

This site uses Akismet to reduce spam. Learn how your comment data is processed.